Tyco T1216-C User Manual

EQUIPMENT: T1200-C
PUBLICATION: MARINEC-P-A
ISSUE No. & DATE: 3 02/14
© 2014 Thorn Security Ltd PAGE 1 of 67
Registered Company: Thorn Security Ltd. Registered Office: Dunhams Lane Letchworth Garden City Hertfordshire SG6 1BE
TYCO T1200-C
Marine
Fire Detection/Alarm Control Panel and Repeater
Application Guide

Tyco T1216-C Specifications

General

Brand	Tyco
Model	T1216-C
Category	Control Panel
Language	English

Summary

4.1 Cabinet Specifications

4.1.1 Order Codes & Descriptions

Lists Tyco part numbers, descriptions of panels, repeaters, and power supplies for ordering.

4.2 Fire Detection and Alarm Panel Description

4.2.10 C1714 – VDR Output Module

5. Functional Specification

5.1 T1200 Panel Input/Output List

A table detailing the inputs and outputs for T1204, T1216-C, and T1232-C panels.

5.2 Features List

6. T1204 Motherboard (C1626) Features

7. T1216-C/T1232-C Motherboard (C1627) Features

10. C1714 Voyage Data Recorder Interface Module

14. Power Supplies

14.2 T1204A1 110V AC and T1204A2 230V AC mains powered PSUs

14.3 PS40-1-09 and PS136-1-09 Power Supplies

Describes the PS40-1-09 and PS136-1-09 power supplies, their features, and specifications.

14.5.1 T1200 Power Supply Features and Connections

15. Compatible Field Devices

15.1 Field Device Part Numbers

Lists compatible field devices with manufacturer, part number, description, and current draw.

16. Overview Of User Functions

16.1 User Indications

16.2 User Controls

Details the panel buttons, their functionality, and availability for user operation.

16.3 Selection of Zones or Outputs for Disablement, Enablement or Test

16.7 Turning the Delay Mode on/off

17. Overview of Engineers Functions

17.1 Engineer's configuration process

Outlines the engineer's configuration process using DIL switches and the select feature.

17.3 Configure Delayed Outputs

17.6 Configure Intrinsically Safe Zones

Details the configuration of Intrinsically Safe zones, including wiring and isolator requirements.

17.7 The Delay Mode Feature

17.12 Selectable Muster/Manual Fire Alarm Sounder operation

17.23 Output Relay Configuration

18. Panel Repeaters

18.2 Repeater User Controls

19. Circuit Connection Details

19.1 T1204 (C1626) 4-Zone Panel Termination Details

19.4 Auxiliary Supply

19.7 Sounder Circuits

19.8 Electrical Design of Detection Zones

19.8.2 Intrinsically Safe Zones

Provides warnings and requirements for I.S. zone wiring and equipment installation.

19.9 Repeater Panel and Repeater Muster Wiring

20. Mechanical, Electrical and Environmental Specification

21. T1200-C Input and Output Specification

22. Appendix

22.3 Power Supply Load Calculation

22.4 Minimum Standby Battery Capacity Calculation

Details how to calculate the minimum required standby battery capacity for the control panel.

22.6 Panel Configuration Design Chart