To Next PageTo Next Page
Need help?Do you have a question about the Tyco T1200-C Series and is the answer not in the manual?
General| Brand | Tyco |
|---|---|
| Model | T1200-C Series |
| Category | Control Panel |
| Language | English |
Provides an overview of the T1200-C panel range, its compliance, and components.
Details the enclosure construction, material gauge, and paint finish.
Lists Tyco part numbers, descriptions, and standby battery details.
Provides part numbers for replacement components and their applications.
Describes insert sets for foreign language variants and switch configurations.
Details the part number and usage of the T1200 Door Stay Assembly.
Details the components of the T1204, T1216-C, and T1232-C panels.
Describes the features and purpose of the C1626 motherboard.
Details the features of the C1627 motherboard used in T1216-C/T1232-C panels.
Explains the function of the C1632 board for adding 16 detection zones.
Describes the C1628 and C1629 display boards for user indications and controls.
Details the display overlay and the use of text label inserts.
Explains the C1631 board for RS485 serial communication with repeaters.
Describes the C1665 board for fault-monitored link between panel and repeaters.
Details the expandable modular output system comprising Output Interface and Output boards.
Explains the C1630 PCB providing the communication path for output modules.
Describes the C1714 module for signalling critical panel conditions to a VDR.
Explains the features and connectivity of T1200-C repeaters.
Lists and compares the inputs and outputs for T1204, T1216-C, and T1232-C panels.
Details the features of the T1200-C panels, including enclosures and configurable zones.
Explains the C1714 module's function for VDR connection and data output.
Defines the sentence format for zonal fire events and provides examples.
Defines the sentence format for zonal fault events with examples.
Defines the sentence format for general faults and clear messages.
Defines the sentence format for mains fault events and clear messages.
Defines the sentence format for battery fault events and clear messages.
Defines the sentence format for zonal disablement and enablement events.
Defines the sentence format for status messages transmitted every 10 seconds.
Describes hourly status messages for VDRs, including START and END messages.
Defines the sentence format for communication loss and restoration.
Defines the sentence format for panel reset events.
Overview of the T1200 range power supplies, their features and approvals.
Details the mains powered PSUs for the T1204 panel.
Describes the 24Vdc PSU for vessels using 24Vdc installations.
Details the 4A 110/230Vac PSU used in T1216-C and T1232-C panels.
Specifies the input voltage requirements for the PSUs.
Details the fuses used for AC and DC power supplies and battery circuits.
Specifies the DC output voltage and current for PS40 and PS136 series PSUs.
Describes the battery charging capabilities and specifications.
Explains the temperature-compensated charging voltage and thermistor monitoring.
Details the monitoring of the charger output and fault reporting.
Covers battery connection protection and testing functionalities.
Explains the automatic battery disconnection and reconnection features.
Details the LED indicators on the PSU for status and fault conditions.
Describes the open collector fault outputs for signalling to the fire panel.
Provides a warning regarding the connection of the safety earth wire.
Highlights warnings about hazardous voltages and ventilation.
Illustrates the layout and connections for PS40 and PS136 power supplies.
Lists compatible field devices, part numbers, descriptions, and specifications.
Details the general indicator LEDs and their operating conditions.
Explains the functions of user buttons and keyswitch operations.
Describes how to select zones or outputs for disablement, enablement, or test.
Explains how to disable/re-enable zones and specific outputs.
Details the procedure for performing a detector zone one man test.
Describes the one man test for sounders, operating them intermittently.
Explains how the delay mode is activated and controlled.
Describes methods to override the delay mode and operate outputs immediately.
Explains how to adjust the brightness of panel and repeater LEDs.
Details how configuration is controlled via DIL switches and the engineer's select feature.
Explains the process of selecting zones/outputs for configuration using Cursor Select.
Describes how to configure outputs as delayed or non-delayed.
Explains how to configure zones as Machinery Space or Standard zones.
Details the configuration of zones as non-latching fire zones.
Explains the configuration and requirements for intrinsically safe zones.
Describes the delay mode feature for automatic fire detector response.
Details how to select specific outputs for delayed operation.
Explains the selection between zonal and general alarm sounder operation.
Describes the DIL switch for zonal sounder response in fire conditions.
Details the Crew Area Alarm mode and its sounder operation logic.
Explains the DIL switch functionality for restarting the delay.
Describes the setup for Muster or Manual Fire Alarm sounder response modes.
Explains the DIL switch for controlling Fire Protection output on non-latched zones.
Details the DIL switch for preventing silence/reset for a period after fire alarm.
Describes the DIL switch for zone coincidence with Watermist systems.
Explains the DIL switch for sounder operation only in Manual Fire Alarm/Muster.
Details the DIL switch determining reset availability after sounder silence.
Explains the DIL switch for selecting continuous or pulsed sounder operation.
Describes the DIL switch for silent operation during zone test mode.
Details the DIL switch for enabling/disabling the panel buzzer.
Explains the DIL switch for enabling latched fault indication mode.
Describes DIL switches for configuring panel communication with repeaters.
Details link-configurable options for Fire, Fire Protection, and Fault output relays.
Details the LEDs and indications on the repeater panel.
Explains the functions of the user controls on the repeater panel.
Shows field termination details for the 4-zone T1204 panel.
Shows field termination details for the 16-zone T1216-C/T1232-C motherboard.
Shows field termination details for the C1632 17-32 zone expansion board.
Details the auxiliary supply output for powering external field equipment.
Explains the configuration of Fire, Fire Protection, and Fault signal outputs.
Describes how auxiliary inputs allow remote operation of panel functions.
Details the specifications and connections for sounder circuits.
Explains limits on devices per zone based on quiescent current.
Provides warnings and requirements for intrinsically safe zone wiring.
Lists the T1200-C panel's optional functions compliant with EN54.
Highlights auxiliary functions offered by the panel not mandated by EN54.
Provides steps to calculate the maximum power supply load.
Guides the calculation of minimum required standby battery capacity.
