EQUIPMENT: T1200-C
PUBLICATION: MARINEC-P-A
ISSUE No. & DATE: 3 02/14
© 2014 Thorn Security Ltd PAGE 41 of 67
Registered Company: Thorn Security Ltd. Registered Office: Dunhams Lane Letchworth Garden City Hertfordshire SG6 1BE
16. Overview Of User Functions
This section gives an overview of the functions available to the end user.
16.1 User Indications
General Indicator Section
Illuminates Steady for Mains or Standby power On.
Fire Red
Flashes on any new fire alarm condition, changing to a steady indication
on operation of Silence Alarms.
Illuminates Steady when the Fire Output is active.
Flashes for any fault condition.
Flashes for mains or standby power supply/charge fault.
System Fault Yellow
Illuminates Steady to indicate Microcontroller or Memory Failure.
Flashes to indicate Engineer’s Configuration Mode active.
Flashes for any positive or negative power supply earth fault.
Flashes for any auxiliary supply fuse failure.
Flashes for any Repeater fault or repeater communication fault.
Yellow Flashes for any sounder fault. Steady for sounders disabled.
Illuminates Steady while sounder walk test is active.
Fire Protection
Fault/Disabled
Yellow
Flashes for a fault on the Fire Protection Output. Steady when Fire
Protection Output is disabled.
Fire Output
Fault/Disabled
Yellow
Flashes for a fault on the Fire Output. Steady when Fire Output is
disabled.
Fault Output
Fault/Disabled
Yellow
Flashes for a fault on the Fault Output. Steady when Fault Output is
disabled.
1.
2.
3.
4
.
5.
6.
7.
8.
9
.
10.
11.
12
.
13.
14.
15.
16.
0 1
FIRE
POWER SUPPLY ON
POWER SUPPLY FAULT
SYSTEM FAULT
GENERAL FAULT
EARTH FAULT
FUSE FAILED
REPEATER FAULT
FAULT OUTPUT FAULT/DISABLED
SOUNDER FAULT/
DISABLED
SOUNDER TEST
FIRE PROTECTION FAULT/DISABLED
FIRE OUTPUT ACTIVE
FIRE OUTPUT FAULT
/DISABLED
BUZZER
SILENCE
RESET
ENABLE
DISABLE
TEST
TEST DISPLAY
ALARMS
RESOUND
SELECT
ON/
OFF
SELECT
SILENCE/
ALARM
MUSTER
FIRE
1.
THE RED ZONE INDICATOR
WILL PULSE SHOWING THE
LOCATION OF THE FIRE.
2. CARRY OUT THE
REQUIRED FIRE DRILL.
3.
TO SILENCE ALARMS
PRESS SILENCE ALARMS.
4.
TO RESET FROM THE FIRE
CONDITION PRESS RESET
.
FAULT
1.
DETERMINE THE CAUSE OF
THE FAULT.
2. PRESS SILENCE BUZZER
.
3.
CALL YOUR SERVICE
ENGINEER.
SYSTEM FAULT
THE PANEL IS INOPERATIVE
.
ARRANGE FOR ALTERNATIVE
FIRE DETECTION MEASURES.
DISABLEMENT AND TEST
1.
PRESS SELECT ON/OFF
.
THE LED WILL ILLUMINATE.
2. SELECT THE ZONE OR
OUTPUT USING
AND
. THE
FAULT LED WILL PULSE
.
3. PRESS DISABLE OR TEST.
4. TO RE-ENABLE
, SELECT
THE ZONE OR OUTPUT AND
PRESS ENABLE.
OVERRIDE
DELAY
Zone Location Indications
User Generated Zone Location
Text
Red
Flashes when zone is in a fire condition, turning to steady
on operation of Silence Alarms.
User Generated Zone Location
Text
Yellow
Flashes when zone is in a fault condition. Illuminates
steady when zone is disabled or in test.
To Next Page
Loading...
Need help?
General
