under co u n ter extreme
Cleaning
Function
selecting
Voice
On/Off
11:00a
80% 80%
11:00a
80% 80%
11:00a
80% 80%
Cleaning Function
selecting Voice On/Off
User may manually clean unit whenever desired.
1
If the screen is touched, it changes to stand by mode.
2
When functional water is selected on standby mode, it goes into
automatic cleaning for 15 seconds, and the selected functional water will
be dispensed.
1
Press the top left corner of screen. MENU options will fall below upper
part of screen.
2
Press the Cleaningicon.
2
Select the Voiceicon.
1
Press the top left corner of screen. MENU
options will fall below upper part of screen.
3
The voice will be turned on/off by selecting
the voice icon in this sequence.
Cleaning can take place automatically and/or manually.
Auto Cleaning (15 seconds) is performed during water outflow
after more than 12 hours of non-operating or after 30 liters of water
outflow.
Manual Cleaning (15 seconds) is performed whenever desired
simply by touching the icon.
※
Even if volume is turned off, warning notifications
will still play through speaker if necessary.
(filter replacement, water not supplied, TEMP,
Cleaning, Setup mode)
11:00a
80% 80%
※Auto Cleaning
15:00
:15
※Manual Cleaning
11:00a
80% 80% 80% 80%
11:00a
:15
40
41
To Next Page
Loading...
