Tyent Rettin UCE-E11T - System Setup Method

under co u n ter extreme
SYSTE M
SETU P
METHO D
SYSTE M
SETU P
METHO D
2
: ACD pH level up (08%, 09%, 10%...)
◀
▶
I
or
: ACD pH level down(06%, 05%, 04%...)
◀
▶
I
or
Acidic
p
H Level Adjustment
11:00a
80% 80%
2
Press the setup icon.
1
Press the top left corner of screen. MENU
options will fall below upper part of screen.
5
ACD 1ST : 07%
ACD 2ND : 25%
ACD 3RD : 30%
ACD 1ST : 07%
ACD 2ND : 25%
ACD 3RD : 30%
3
Press“ACIDICpH”
4
Press desired level.
11:00a
80% 80%
SYSTEM SETUP METHOD
3
Press“ALKALI pH”
4
Press desired level.
2
Press the setup icon.
1
Press the top left corner of screen. MENU
options will fall below upper part of screen.
ALK
1ST
:
08%
ALK
2ND
:
10%
ALK
3RD
:
16%
TURBO
:
95%
: ALK pH level up (09%, 10%, 11%...)
5
◀
▶
I
or
: ALK pH level down(07%, 06%, 05%...)
◀
▶
I
or
1
ALKALI
p
H Level Adjustment
Push RETURN icon for previous menu screen. Voice says “: Appl ied ”
Push RETURN icon again to complete set up.
Voice says :“Set up was completed”
ALK
1ST
:
08%
ALK
2ND
:
10%
ALK
3RD
:
16%
TURBO
:
95%
Turn the Jog Dial clockwise (or counter clockwise) to
select desired level. Press the PUSH On/Off button of
the jog dial to make selection.
When using the Jog Dial
◀
▶
I
If UP/DOWN Icon is pushed, digital number moves by one step.
Turn the Jog Dial clockwise (or counter clockwise) to
select“ALKALI pH”. Press the PUSH On/Off button of
the jog dial to make selection.
When using the Jog Dial
◀
▶
I
Backcolor
Orange highlight shows current position on menu.
A blue highlight means that changes to that setting are possible.
Push RETURN icon for previous menu screen. Voice says “: Appl ied ”
Push RETURN icon again to complete set up.
Voice says :“Set up was completed”
Backcolor
Orange highlight shows current position on menu.
A blue highlight means that changes to that setting are possible.
Turn the Jog Dial clockwise (or counter clockwise) to
select desired level. Press the PUSH On/Off button of
the jog dial to make selection.
When using the Jog Dial
◀
▶
I
If UP/DOWN Icon is pushed, digital number moves by one step.
Turn the Jog Dial clockwise (or counter clockwise) to
select“ACIDIC pH”. Press the PUSH On/Off button of
the jog dial to make selection.
When using the Jog Dial
◀
▶
I
34
35