Tyent UCE-E13T - Package Contents; Under-Sink Installation

Under Counter Extreme
18
19
Under-Sink Installation Package Contents
Package Contents
Ionizer
Rubber Packing O-Rings
(2EA)
Wrench
pH Testing
Solution Bottle
(Reagent Drops)
User’s Manual
Alkaline hose
(White)
Acid hose
(Orange)
Tap Water
hose
&
Water Outlet Pipe
fixing nut
M
A
N
U
A
L
Stem Elbows
Dispenser
Cable Tie
T-Adapter
Picture of components can be different from the real ones, and some items may be
changed according to advancements in technology.
Under-Sink Installation
T-Adapter
Hose
Cool
water
Do not turn on the main water supply until all hoses are properly
installed to the unit.
The unit and components are subject to change without prior notifi-
cation in order to enhance performance.
Shut off both the hot and the cold water main supply at the pipe under the sink.
Locate the cold water supply line valve.
Disconnect the faucet’s cold water supply line from the main cold water
pipe. Use a towel to catch the small amount of water that may come from
the faucet supply line.
When connecting the T-Adapter to the cold water pipe, be sure to use
plumber’s tape or teflon tape (not included) to prevent leaks.
Reconnect the faucet’s cold water supply line to the T-Adapter (now
secured to the main cold water pipe).
Be sure all connections are secure, but do not overtighten them.
1.
2.
3.
4.
5.
6.
※
※
Under Counter Extreme