EasyManua.ls Logo

Tyent UCE-E13T - Eco Mode; Turbo Function

Default Icon
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Under Counter Extreme
42
43
TURBO Function
ECO MODE
CAUTION!
Select the ECO icon.
ECO MODE TURBO Function
ECO Mode is a feature for saving power consumption during periods of non-use.
1
2
3
4
TURBO
Strong Acidic Water
pH 2.5
~ pH 3.8
Used to Disinfect
and Sterilize
TURBO
Strong Alkaline Water
pH 10.0
~ pH 11.8
To remove stains from
fabrics/carpet/upholstery.
The waters produced in TURBO mode are not intended for drinking.
DO NOT DRINK these types of waters.
DO NOT Use the TURBO function in a manner other than directed.
Alkaline Turbo Water Outflow Acidic Turbo Water Outflow
Press the top left corner of screen. MENU
options will fall below upper part of screen.
If you do not use the unit for 10 minutes, it will
be entered into ECO Mode as you set. When
entering ECO Mode, the screen will display the
date and clock only. If the screen is touched,
the unit will change to Standby Mode.
If you do not use the unit for more than 30
minutes in ECO mode, it will be entered into the
Power Save mode automatically. When entering
Power Save Mode, the screen will become
blank. If the screen is touched, the unit will
change to Standby mode.
ECO Mode will be turned on/off by selecting
the ECO icon in this sequence.
%
50
%
50
%
50
%
50
10
:
30AM
2023 / Oct / 23
The TURBO function allows you to create strong alkaline and strong acidic
water. These types of waters are ONLY to be used for cleaning, sanitizing,
and disinfecting purposes. NEVER DRINK THESE TYPES OF WATER.
The sanitation, sterilization and disenfecting power of the water depends
on your source water. Be sure to check the pH of your source water to
determine if it’s in the correct pH for these uses.

Related product manuals