12
NEW HAVER TWINNUT CLAMPING SYSTEM
The new ‘Haver TwinNut’ clamping system perfectly combines the advantages of the
previous Classic and Easylock Systems.
Function:
The sieve is fixed using the nuts in the same way as the Classic system (1.0 + 3.0).
Varying heights of the sieve tower are achieved by opening the TwinNuts (2.0).
1.0 2.0 3.0
Advantages:
The test sieves can be changed easily and quickly.
Only a small turn is required to open and close the nuts.
The wing-handles make the tightening of the nuts eaiser.
The guide rods of the Classic system can also be used for the TwinNut system
(it can be refitted at low cost).
No grease and dust sensitivity.
Suitable for every application area.
Suitable for all HAVER Test Sieve Shakers.
To Next Page
Loading...
