EasyManua.ls Logo

Tylo VA - User Manual

Tylo VA
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
0905
Art nr 29000145
1
Installation and operating instructions with checklist for faults
Read through these instructions carefully before installation, and follow them in every respect to PLEASE KEEP THESE INSTRUCTIONS IN A SAFE
ensure flawless operation every time. After installation, please give these instructions to the PLACE - THEY CONTAIN IMPORTANT INFORMATION
owner or the person who will operate the steam room. ABOUT SERVICE AND MAINTENANCE PROCEDURES.
steam
VA, VB
USA
Question and Answer IconNeed help?

Do you have a question about the Tylo VA and is the answer not in the manual?

Tylo VA Specifications

General IconGeneral
BrandTylo
ModelVA
CategoryIron
LanguageEnglish

Summary

Installation and Operating Instructions

How to Make the Most of Your Steam Bath

Tips for optimal comfort, hygiene, and relaxation during steam bathing.

Steam Room Cleaning and Maintenance

Instructions for daily cleaning and maintenance of the steam room interior.

Showering in the Steam Room

Recommendation and benefits of installing a shower within the steam room.

Plumbing Installation

Requirements for connecting water and steam pipes to the generator.

Drainage Requirements

Proper installation of the drainage pipe for the steam generator.

Electrical Installation

Procedures for wiring the steam generator and control systems.

Lighting Integration

Connecting and regulating lighting within the steam room.

Thermistor (Sensor) Placement

Correct positioning of the temperature sensor for accurate readings.

Control and Accessory Wiring

Wiring for control panels, external switches, and extra equipment.

Checking and Fault Finding

General Checks and Troubleshooting Checklist

Initial diagnostic steps and a list of common problems and solutions.

Specific Component Testing

Detailed tests for reservoir, sensor, solenoid valve, and steam pipe.

Test 1: Calcium Deposits

Procedure to check for and address calcium buildup in the reservoir.

Test 2: Temperature Sensor

Verifying the accuracy and placement of the temperature sensor.

Test 3: Solenoid Valve

Diagnosing issues with the water supply solenoid valve.

Test 4: Steam Pipe and Safety

Checking for steam pipe blockages and safety valve activation.

Configuration and Specifications

Technical Specifications

Electrical specifications (kW, Amp, AWG) for different models and voltages.

DIP-Switch Settings

Configuration options using DIP switches for timer and test functions.

Related product manuals