3
3-17
DESCRIPTION OF OPERATING SYSTEM
■ Remote Control Lever (OPTION)
When using an attachment for an implement (rotavator, hydraulic plow, etc.),
connect its hose to the proper port.
■ Remote Control Valve (OPTION)
• How to engage coupler
1. Clean the couplers on the tractor and implement thoroughly.
2. Remove the dust cover from the tractor side. Then, fit the male coupler on the
implement side while moving its external ring backward slightly.
3. Pull the male coupler on the implement side backward slightly to check its firm
engagement.
• How to disengage coupler
1. Lower the implement on the ground to release pressure in the hydraulic hose.
2. Stop the engine and operate the remote hydraulic lever to remove any residual
pressure in the hose.
3. Disconnect the male coupler on the implement side while moving its external
ring on the tractor side backward slightly.
4. Wipe oil and dust from the coupler and plug the dust cover.
Remote Control Lever
Remote Control Lever
CAUTION
To prevent a burn and skin damage, make sure to stop the engine before connecting or disconnecting the
coupler.
Do not use your hands to check for oil leakage.
To Next Page
Loading...
Need help?
General
