C
TRACTOR INSTRUMENTS
C
▶ HAZARD WARNING SWITCH
This switch can be used to warn other
vehicles when malfunction occurs in the
tractor while driving on public road.
When pressing the switch once, left and
right signal lights blink.
To turn off, press the switch once again.
▶ COMBINATION SWITCH
Turn signal lights, head light and horn
can be operated with this switch.
1. Right/Left turn signal switch
2. light switch (low(①)/high(②) beam)
3. Horn switch
▶ KEY SWITCH
This switch is used to operate engine.
1. GLOW –
G
low plugs pre-heat the
combustion chamber.
2. OFF –
T
he ignition key can be inserted and
removed in this position.
Engine is stopped in this position.
3. ON –
T
he engine is kept running and
switches are energized in this
position.
4. START –
T
he engine can be started in this
position.
When releasing the key, the switch
is returned to「ON」position.
3
R
L
HORN SWITCH
TURN SIGNAL
SWITCH
LIGHT SWITCH
HAZARD WARNING SWITCH
Use it only when necessary as it can
discharge battery and obstruct other
drivers.
IMPORTANT
If one side is blinking, the other side is
still on.
This lever is not automatically returned
to the neutral position.
Therefore, set it back to the neutral
position after turn.
The high beam can obstruct the view of
other drivers coming in the opposite
direction on a road, leading to an
unexpected accident.
IMPORTANT
To Next Page
Loading...
