TRACTOR INSTRUMENTS
C
4
▶ PTO INTENTION SWITCH
PTO intention switch can control the
rotation of PTO shaft on condition of
operator’s position.
• ON – PTO shaft keep rotating
whether operator leaves the seat or
not.
• OFF – PTO shaft stops when operator
leaves the seat.
▶ PTO SWITCH
Operation for 'automatic' and
'manual‘ positions of the PTO switch is
as follows :
• 「ON」-
When pressing the switch, the red
lamp comes on and the PTO shaft
rotates.
• 「OFF」-
When pressing the switch again, the
lamp goes off and the PTO shaft
stops rotating.
PTO shaft will not rotate if PTO switch is
in OFF position.
▶ CRUISE CONTROL SWITCH
When pressing the cruise switch, the
button lamp comes on, cruise is
activated, and the lamp on the monitor
panel comes on.
The cruise is deactivated if pressing the
switch to the OFF portion or depressing
the brake pedal.
CRUISE CONTROL SWITCH
PTO SWITCH
PTO INTETION SWITCH
To Next Page
Loading...
