C
TRACTOR INSTRUMENTS
C
▶ SUB SHIFT LEVER
The range shift lever is used to select
the speed range of tractor.
The lever can be shifted only when the
tractor stops completely.
The lever is linear and has three
positions, a neutral and two range gears.
A neutral is located between L and H
range gear.
▶ THROTTLE LEVER
The hand throttle lever is used to
change engine speed.
• Pulling the throttle lever toward the
operator decreases engine speed.
• Pushing it away from the operator
increases engine speed.
▶ SPEED CONTROL PEDALS
These are used to move the tractor
forward or backward.
13
Do not change from forward to
backward or backward to forward
suddenly in high range.
Sudden change may result in damage of
mechanism and place the operator at
risk of injury.
IMPORTANT
THROTTLE LEVER
SPEED CONTROL PEDALS
SUB SHIFT LEVER
Operate the sub shift lever only after the
tractor is completely stopped.
Shifting the lever during driving can
damage the gears.
IMPORTANT
To Next Page
Loading...
