EasyManua.ls Logo

Tymate M12-3 - Disclaimer and Usage Tips; Disclaimer; Some Using Tips

Tymate M12-3
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Please note that the following conditions are normal in product use.
1) Please use this product correctly and use it within its allowable range. If it is used
beyond its scope, the company will not be responsible for all consequences.
2) The installation process should strictly follow the instructions of the user manual. If any
damage caused by the installation is not according to the instructions, the company will
not be responsible for it or give any explanation!
3) When setting the alarm value, please strictly abide by its range. Different models should
be set according to the tire parameters or manuals, or the range given by the agents or
dealers. (Generally, if the system is set up, there is no need to modify it in the future.) If
there are product failures caused by self-setting or improper settings, the company does
not bear any responsibility for it.
4) The content of this manual will be subject to change without prior notice. Pictures in this
article are just for illustration. Please refer to the actual product.
5) Be sure to ask an experienced tire installation technician to install. When you need to
disassemble the tire again, please be careful not to damage the sensor.
9. Disclaimer
1. The data update time of the sensor is about 5 minutes. And if you change the sensor to
another wheel, the previous data may stay for a while. If the sensor is removed, there will
still be data staying on the display. This is normal, and it may take up to 2 hours for the
display to completely disappear after hours of data display.
2. There will be a slight air leak in the tire after the sensor is installed. This is normal,
please rest assured to use.
3. It is normal for the sensor to be worn and corroded by the external environment. We
recommend that you buy some extra sensors as backup. When the sensor is abnormal,
you can try to solve the problem according to the following instructions. If the problem is
still not solved, you can contact us for after-sales service to get the replacement sensor.
10. Some Using Tips

Related product manuals