Monitor
9. Technical Parameters
10. The Disclaimer
10.1 Please use this product correctly and use it within its allowable range. If it is used
beyond its scope, the company will not be responsible for all the consequences.
10.2 The installation process should strictly follow the instructions of the user instruction. If
any damage caused by the installation that does not follow the instructions, the company
will not be responsible for the consequences or give any explanation.
10.3 When setting the alarm value, please strictly abide by its range. Different models
should be set according to the tire parameters or the manuals, or the range given by the
agents or dealers. (Generally, if the system is set up, there is no need to modify it in the
future). If there is any product failure caused by self-setting or improper settings, the
company does not bear any responsibility for it.
10.4 The content in this instruction will be subject to change without prior notice. The
pictures in this instruction are just for illustration. Please refer to the actual product.
10.5 Be sure to ask an experienced tire installation technician to install the product. When
you need to disassemble the tire again, please be careful not to damage the sensor.
The tire icon flashes.
For example, the ID code of the left front tire is 83A512.
Working Temperature
Storage Temperature
Voltage
Frequency
Dimension (L*W*H)
Weight
Pressure Setting Range
Temperature Setting Range
Pressure Monitor Range
Temperature Monitor Range
-20˫~80˫
-30℃~ 85˫
DC 12~24V
433.92 MHz
76*50*22 mm
58g
15~144 PSI (1.0~9.9 BAR)
77~212˭ (25~100˫)
0~87 PSI (0~6 BAR)
-
104~176˭ (-40~80˫)
To Next Page
Loading...