TypeS S402 - G-Sensor; Motion Detection; Parking Monitor

13
Exposure
• Adjust the exposure level between +2.0, +1.0, 0,
-1.0 and -2.0 for dierent lighting conditions.
G-Sensor
• Adjust the G-Sensor sensitivity between O,
High, Mid and Low.
• When the G-Sensor detects a sudden impact
such as a collision, it'll automatically "lock" the
footage and move it into the Events folder so
that it doesn't get overwritten by the loop record
feature.
Motion Detection
• Motion Detection On/O. The Motion Detection
function allows the Dashcam to start recording
automatically when a moving object is detected.
Please only use this function when the car is
parked.
Parking Monitor
• Parking Monitor On/O. The Parking Monitor
function allows the Dashcam to record videos
when an impact is detected while the vehicle’s
engine is o. The Dashcam will power on
automatically and record a 20-second video clip
then shut down.
NOTE: Feature only available when the
Dashcam is hardwired to the fuse panel.
Hardwiring kit (AC533513) sold separately.
Loop Record
• Select the duration of each recorded footage
between 1 minute, 3 minutes and 5 minutes.
Oldest and unlocked les will be overwritten
once the storage limit is reached.
Time Lapse
• Select between normal video or time lapse
video. (Refer to page 18).