EasyManua.ls Logo

TypeS T401 - Faqs; Safety Information; Important Safety Instructions

TypeS T401
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
1) Problem: The camera does not provide AI warnings when it should after driving for an extended
period.
Solution: Please 1) Enter calibration mode (Menu – Driver Assistance – Recalibrate AI) and adjust the
camera angle up or down slightly, then 2) Check to see if GPS signal is received.
2) Problem: The camera is unable to take pictures or record videos.
Solution: Please try formatting the MicroSD card
(Menu – General Settings – Format SD Card).
3) Problem: Message showing “SD card error.
Solution: Please try formatting the MicroSD card
(Menu – General Settings – Format SD Card).
4) Problem: The image or video looks foggy.
Solution: Please 1) Make sure that you’ve removed the protective lm cover on the camera lens, and
2) Try wiping the camera lens.
5) Question: Can I use my own MicroSD memory card?
Answer: Yes, you can use your own. If you choose a memory card over 64GB, please make sure it’s
U3 rated to ensure optimal recording performance.
17. FAQS
IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions of
12/24V car charger for Model BT534217.
2. Before using the product, read all instructions and cautionary markings.
3. Do not expose car charger to rain, moisture, or snow.
4. Use of an attachment not recommended or sold by the product manufacturer may result in a risk of
re, electric shock, or injury to persons.
5. To reduce risk of damage to cigarette lighter connector and cord, pull by cigarette lighter connector
rather than cord when disconnecting car charger.
6. Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected
to damage or stress.
18. SAFETY INFORMATION

Related product manuals