5 // SETTING UP
1. Switch on machine.
2. Place bobbin (1) on the bobbin winder spindle (2)
3. Wind the thread a view times in the shown direction on
the bobbin (1)
4. Push the bobbin winder lever (3) in direction of the bobbin.
5. Lift the sewing foot with the lifting lever.
6. To start the winding press the fool pedal.
7. The bobbin winder lever (3) will release automatically
when winding is finished.
8. After finishing the bobbin winding remove bobbin and cut
the thread on the cutter (4)
Loosen the screw (5) and adjust the bobbin winder lever
to the desired thread amount.
The capacity of the bobbin should be utilized by 80 %.
5/3 Bobbin winding
Less thread
More thread
Caution
Do not touch moving parts. This can lead to injury or damage to the machine.
To Next Page
Loading...
