EasyManuals Logo

TYT MD-750 User Manual

TYT MD-750
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
13
codeword is a remote code or wake-up code.
6.2 PTTID
Initiation: In analog mode, you can configure the DTMF online and offline codes through the host computer. The
analog channel enables the online and offline codes. Each time the PTT is pressed, the online code is issued.
7.Sacn
7.1 switch
1The upper computer configures the current channel to enable automatic scanning, switch to this channel for
automatic scanning
2The upper computer configures the scan list of the current channel to be valid, and you can enter the menu scan
to start the scan (there is no setting to enable scan in the menu)
3Side button to set the scan switch to enable or disable scanning (cannot select double wait)
8. Menu configuration is optional.
When your machine does not want some menus, you can configure whether it is open through the upper computer
menu items. The configuration items are as follows
Basic (menu suspend time / message)
Scan (scan switch / scan list)
Contact (call prompt / edit / manual dialing / interphone detection / remote monitoring / interphone activation /
interphone remote control / one-touch dialing)
Settings (off-line / tone / power / backlight / power-on interface / keyboard lock / LED indicator / squelch /
encryption / voice control / password lock / dual standby)
Call Log (Missed Calls / Received Calls / Dialed Calls).
9. special function
Radio function:
Press the OK key to enter the menu, select the accessory and press OK to enter.
1. If the lower computer is not edited, it can also be stored manually. If the current channel is NULL, press OK to
confirm, and then press the button: 1. Enter the channel: enter the channel programmed by the upper computer. 2.
At this time, the frequency will display 108 . Please directly enter the desired frequency or press the * key to scan.
After receiving the desired frequency, press OK to store it in the channel.
2. If potential storage, you can directly choose to enter the frequency point you want.
Question: What is the range that can be entered

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TYT MD-750 and is the answer not in the manual?

TYT MD-750 Specifications

General IconGeneral
BrandTYT
ModelMD-750
CategoryTwo-Way Radio
LanguageEnglish

Related product manuals