5
四． Menu info
Press OK to enter the menu; press up, down, left, and right to select, press OK to confirm; press EXIT to return
Check contact name and number
Only
support
digital
mode
The contact configuration number is 0-9, and
choose empty to turn off quick key.
Enter the contact number, maximum 16777214,
press OK to confirm, press BACK to delete
Enter name, support upper and lower case
letters and special character input
There are 10 kinds of tones to choose from.
When the caller chooses to enable the call
prompt and the caller's own number is the new
contact, the unit will send the tone. Choose
Off to turn off tone.
Enter the number manually, press BACK button to delete or return, press
the OK button to choose corresponding operation. Press PTT to call the
single-call contact for dialing, up to 16777214(16777215 full call number)
Unread mark , read mark , press OK to
edit the content, then press OK to reply /
forward / delete
Only
support
digital
mode
Yes: delete all, No: don't delete
Support upper and lower case letters and
special character input, press # key to
switch input method, press OK to select send
/ save / clear
Press OK button to edit the content, then
press the OK button to
resend/forward/edit/delete
Yes: delete all, No: don't delete
Press OK button to edit the content, then
press the OK button to send/edit/delete
Yes: delete all, No: don't delete
Press the OK button to edit the content, then
press the OK button to send / save / clear
Dialed private call, press OK to view/add
contact/delete, add to contact to enter
alias to store in contact list
To Next Page
Loading...
Need help?
General
