EasyManua.ls Logo

U-Line BCM-95 User Manual

U-Line BCM-95
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.U-LineService.com
Phone (414) 354-0300 • FAX (414) 354-7905
Service & Parts Tech Lines Phone (800) 779-2547 • FAX (414) 354-5696
OnlineService@U-Line.com
©2005 U-Line Corporation
02/2005
WH95TP, BI95BTP and
BCM95 Ice Makers
for Marine or Recreational Vehicle Use
Installation Guide

Other manuals for U-Line BCM-95

Question and Answer IconNeed help?

Do you have a question about the U-Line BCM-95 and is the answer not in the manual?

U-Line BCM-95 Specifications

General IconGeneral
TypeBuilt-In
Width24 inches
Defrost TypeAutomatic
Voltage115 V
Width (in)24
FinishStainless Steel
Storage Capacity95 lbs
RefrigerantR134a
Product TypeIce Maker

Summary

Follow Safety Precautions

Safety Alert Definitions

Explains the meaning of Danger, Warning, and Caution safety alerts.

General Precautions

Inspect and Plan

Tools/Materials Required

Lists necessary tools and materials for installation.

Inspection

Instructions for inspecting the unit upon delivery.

Exterior Cleaning

Guidance on cleaning exterior surfaces of the unit.

Prepare Site

Cut-Out Dimensions

Specifies the required cabinet cut-out dimensions for installation.

Product Dimensions

Details the overall physical dimensions of the ice maker unit.

Door Swing/Clearances Information

Information on door opening clearances and swing direction.

Reversing the Door

Other Site Requirements

Power Supply

Requirements for the electrical power source for the unit.

Water Supply

Requirements for the water supply line and connection.

Environmental Requirements

Specifies suitable ambient temperature and location conditions.

Prepare and Install Door Panel

Custom 1/4" Thick Door Panel Insert

Instructions for preparing and installing a custom door panel insert.

Door Panel Preparation

Steps for preparing a custom door panel for insertion.

Door Panel Installation

Detailed steps for installing the custom door panel.

Adjust Door

Checking Door Alignment

Procedure for checking the alignment of the unit's door.

Adjusting Door Alignment

Steps to correct the door alignment if it is not proper.

Prepare Plumbing

Water Supply Connection

Detailed instructions for connecting the unit to the water supply.

Prepare Power Supply

Electrical Specifications

Details the electrical requirements and specifications for the unit.

Level the Unit

Leveling Information

Importance of leveling and how to check it.

Install the Unit

Installation of the WH95TP, BI95BTP or BCM95

Steps for physically installing the unit into its location.

Grille Installation

Instructions for installing the front grille onto the unit.

Start-Up for the First Time

Initial Start-Up

Steps for the initial power-on and operation of the ice maker.

Installation Troubleshooting

Common problems and solutions during installation.

Start-Up Troubleshooting

Who to Call

Service Information

Guidance on contacting service or finding a service company.