PAGE 2 OF 6 1120 IH-8961
MOBILE BASE PARTS LIST
MOBILE BASE ASSEMBLY
CABINET TO BASE ASSEMBLY
Base x 1 Caster with Brake x 4 Bolt x 16 Lock Washer x 16 Nut x 16
1. Align caster plate with bolt holes on base. Insert four
bolts through base into caster plate. Attach bolts
with lock washers and nuts. (See Figure 1)
2. Tighten nuts with 14 mm wrench.
3. Repeat for remaining casters.
Figure 1
NOTE: Before setting charging cabinet on
mobile base, please make sure all contents
are removed from cabinet.
1. Engage brakes on all four casters of mobile base.
2. Using two people, carefully lift cabinet onto mobile
base, making sure cabinet rests within outer lip of
base. (See Figure 2)
Figure 2
-800-295-551
To Next Page
Loading...
