Need help?Do you have a question about the U-Line SP18 and is the answer not in the manual?
General| Product Type | Ice Maker |
|---|---|
| Storage Capacity | 12 lbs |
| Energy Star Rated | No |
| Drain Required | Yes |
| Refrigerant | R-134A |
| Door Style | Solid |
| Finish | Stainless Steel |
| Door Options | Reversible |
| Installation Type | Built-In |
| Ice Type | Crescent |
| Finish Options | Stainless Steel, Black |
| Electrical Requirements | 115V/60Hz |
| Water Connection | 1/4 inch copper tubing |
| Width | 18 inches |
Please read all instructions before installing, operating, or servicing the appliance.
Defines risk types: Danger, Warning, Caution based on severity.
Unit designed for free-standing or built-in. Front grille must not be obstructed.
Diagram showing required dimensions for installation, including cutout height and width.
Water valve uses 1/4" fitting. Recommends U-Line hookup kit, braided flexible line.
Connect to potable water supply, observe codes, pressure between 20-120 psi, shut-off valve required.
Units lack leveling legs, must sit on a level surface for even ice mold filling.
Steps for positioning the unit, checking leveling, and cleaning the interior.
Instructions for preparing and installing a custom door panel, max thickness 1/4".
Specifies the maximum weight for the door panel and provides width/height dimensions.
How to check if the door is properly aligned and sealed.
Steps to loosen, align, and tighten hinge screws for proper door alignment.
Instructions to mount the door on the opposite side of the cabinet.
Explains how the ice maker shuts off when full and how to handle fused cubes.
Raise the bin arm to upright and locked position to stop production and preserve temperature.
If not using the ice maker, turn off the water supply valve and raise the bin arm.
Instructions for cleaning vinyl clad, stainless steel, and integrated exterior surfaces.
Steps for cleaning the interior and removed components using mild detergent and water.
Unit requires manual defrost when frost build-up reaches 1/4" or more.
Step-by-step instructions for manually defrosting the unit.
Recommended steps for periods of extended non-use, including cleaning and drying.
Procedures for winterizing the unit if exposed to temperatures of 40°F (5°C) or less.
Read control operation and troubleshooting guides to identify common problems and remedies.
Contact U-Line for service, providing model and serial numbers.
Description of common sounds produced by refrigeration components.
Table listing problems, possible causes, and remedies for common issues.
To Next Page
