U-Line UCBF432-SS11A - 4 The Other Screen (More); Hold

26
26
Rev08/04/2015
4. The “Other” Screen (More)
The Other screen allows the user to put the chiller in a Hold only mode,
perform a Thawing cycle (if applicable), activate a UV Lamp sterilization cycle
(if applicable), perform a manual defrost cycle, turn on the Optional Heated
Probe, access the Service menu or go into the Options menu.
4.1. Hold
To select the Hold option, press the Hold tab.
To change the hold temperature, press the Air temperature tab, the tab will
turn blue and you can select a temperature from -40°C(-40°F) to 8°C(46°F). If
no temperature is selected or a temperature is selected outside of the range
and start is pushed, the tab will turn red and not allow you to continue until a
correct temperature is selected.
Once you have selected a temperature, press OK and the cycle will begin.