U-Line UCBF432-SS11A - Parameters Restore

69
6.3. Parameters
Restore
At any time is possible to restore the original parameter list that was loaded
into the controller via USB key
parameters).
Press PARAMETERS RESTORE.
Press the green checkmark to confirm.
Wait until the screen returns to the main service options.
Manuals
and S
69
Restore
At any time is possible to restore the original parameter list that was loaded
into the controller via USB key
(see chapter 4.6.9 Software Update
Press PARAMETERS RESTORE.
Press the green checkmark to confirm.
Wait until the screen returns to the main service options.
and S
ervice Updates
Rev08/04/2015
At any time is possible to restore the original parameter list that was loaded
(see chapter 4.6.9 Software Update
- only