U-Line UCBF432-SS11A User Manual

87
7.2.
Access the source HACCP files
The tracer software is a powerful tool to graph all cycle stored in the Blast
Chiller memory. However, it’s possible to open the .csv source files for
checking data or ot
her purpose.
haccp
extracted folder (see first section of this chapter). Open the wished
cycle with Excel or an equivalent spreadsheet software. The data will be
shown as in the below
screenshoot
Data at column A represent date/hour/minutes/second.
format to “Number”
in order to show the time
places to 0.
Next page will show an example of how the rows should
appear, and how to read the information.
Manuals
and S
87
Access the source HACCP files
for own purpose
The tracer software is a powerful tool to graph all cycle stored in the Blast
Chiller memory. However, it’s possible to open the .csv source files for
her purpose.
Access the .csv files directly from the
extracted folder (see first section of this chapter). Open the wished
cycle with Excel or an equivalent spreadsheet software. The data will be
screenshoot
:
Data at column A represent date/hour/minutes/second.
Change the cell
in order to show the time
properly. Reduce decimal
Next page will show an example of how the rows should
appear, and how to read the information.
and S
ervice Updates
Rev08/04/2015
for own purpose
The tracer software is a powerful tool to graph all cycle stored in the Blast
Chiller memory. However, it’s possible to open the .csv source files for
Access the .csv files directly from the
extracted folder (see first section of this chapter). Open the wished
cycle with Excel or an equivalent spreadsheet software. The data will be
Change the cell
properly. Reduce decimal
Next page will show an example of how the rows should

U-Line UCBF432-SS11A Specifications

General

Brand	U-Line
Model	UCBF432-SS11A
Category	Freezer
Language	English