Ubee UBC1301-AA00 User Manual

Ubee Interactive Using the Advanced Settings Options
Ubee UBC1301-AA00 Advanced Wireless Voice Gateway Subscriber User Guide • March 2017 66
4. Enter information in the port trigger fields as shown in the screen shot below. Field
descriptions follow.
5. Click Apply. The triggering rule is created and displayed in the table as shown below.
Additional field descriptions follow.
Label Description
Trigger Start Port Defines a port number or the starting port number in a range of port numbers.
Trigger End Port Defines a port number or the ending port number in a range of port numbers.
Target Start Port Defines a port number or the starting port number in a range of port numbers.
Target End Port Defines a port number or the ending port number in a range of port numbers.
Protocol Defines the protocol type for this rule, UDP, TCP, or Both.
Description Names the triggering rule.
Enabled Enables (on) or disables (off) the triggering rule.
Apply Saves the triggering rule.
Cancel Cancels the triggering rule.

Ubee UBC1301-AA00 Specifications

General

Brand	Ubee
Model	UBC1301-AA00
Category	Gateway
Language	English