Ubee UBC1329AA00 Advanced Wi-Fi 6 Voice Gateway User Manual • February 2021 31
EDIT
When you click the EDIT button, you are taken to the Wi-Fi Edit 2.4GHz page. Refer
to Wi-Fi Edit 2.4GHz on page 40.
SSID
Displays the primary wireless network name (SSID) for the 2.4GHz radio band to
which client devices connect. It displays the default SSID unless you have changed
the SSID to a personalized one.
The default SSID is “Wi-Fi” plus the last 6 characters of the gateway’s cable modem
MAC address (all in upper case). The default SSIDs can be found on the device label.
Wireless
Network (Wi-Fi
2.4GHz)
Displays whether the 2.4GHz wireless network is active or not.
Supported
Protocols
Displays the supported 802.11 wireless networking standards. 802.11b/g/n/ax are
supported on the 2.4GHz radio band.
Security Shows which security mode is currently in use.
No. of Clients
Connected
Shows the number of wireless clients currently connected to the 2.4GHz Wi-Fi
network.
Private Wi-Fi Network - 5G
EDIT
When you click the EDIT button, you are taken to the Wi-Fi Edit 5GHz page. Refer to
Wi-Fi Edit 5GHz on page 45.
SSID
Displays the primary wireless network name (SSID) for the 5GHz radio band to which
client devices connect. It displays the default SSID unless you have changed the SSID
to a personalized one.
The default SSID is “Wi-Fi” plus the last 6 characters of the gateway’s cable modem
MAC address (all in upper case), then “-5G” is added to denote the 5GHz band. The
default SSIDs can be found on the device label.
Wireless
Network (Wi-Fi
5GHz)
Displays whether the 5GHz wireless network is active or not.
Supported
Protocols
Displays the supported 802.11 wireless networking standards. 802.11a/n/ac/ax are
supported on the 5Hz radio band.
Security Shows which security mode is currently in use.
No. of Clients
Connected
Shows the number of wireless clients currently connected to the 5GHz Wi-Fi network.
Label Description
To Next Page
Loading...
Need help?
General
