Ubee UBC1329AA00

Ubee UBC1329AA00 Advanced Wi-Fi 6 Voice Gateway User Manual • February 2021 49
4.2.6 Wi-Fi Add Wi-Fi Client
The Wi-Fi > Add Wi-Fi Client page allows devices to connect to the wireless
network using WPS (Wi-Fi Protected Setup). WPS eliminates the need to know
the encryption type, network name (SSID), or the wireless password.
Broadcast
Network
Name
When enabled, the SSID, or network name, is visible to wireless clients wishing to connect
to the UBC1329AA00. When not enabled, the SSID will not
be visible for connection.
Enable
WMM
Check the box to enable WMM (Wi-Fi Multimedia). WMM controls WLAN transmission
priority on packets transmitted over the wireless network to ensure quality of serive in your
wireless network.
NOTE: Disabling WMM will break the 802.11n specification and result in speeds that tend
toward a maximum speed of 54Mbps (802.11g max speeds).
Save
Settings
Select to save the 5GHz wireless configuration.
Cancel Select to cancel the 5GHz wireless configuration.
Label Description