Ubee UBC1329AA00 Advanced Wi-Fi 6 Voice Gateway User Manual • February 2021 84
Add
Service
Add Port
Forward
Click on ADD SERVICE to configure a new port forwarding rule:
The Add Port Forward page let’s you configure port forwarding rules.
Common Service: Select a service from the drop down menu. Options are:
Service Name: Enter a name for the port forwarding rule in the space provided.
Service Type: Select the appropriate protocol: TCP/UDP, TCP or UDP.
Server IPv4/IPv6 Address: Enter the IPv4 or IPv6 address (whichever is applicable) of
the host device for which you are configuring the port forwarding rule.
Start Port: Enter the starting port number of the website or application.
End Port: Enter the ending port number of the website or application.
Connected
Device
Select CONNECTED DEVICE to see a list of devices currently connected to the gateway.
If you wish to add a connected device to the port forwarding rule, check the Add circle to
the right of the device and then click Add on the bottom left.
Label Description
To Next Page
Loading...
