Need help?Do you have a question about the Ubiquiti AF-2X and is the answer not in the manual?
General| Brand | Ubiquiti |
|---|---|
| Model | AF-2X |
| Category | Wireless Access Point |
| Language | English |
Provides an introduction to the Ubiquiti Networks airFiber X Carrier Backhaul Radio user guide.
Details the physical components of the airFiber X radio, including ports and LEDs.
Lists all items included in the airFiber X radio package.
Explains the function of the Management (MGMT), Reset, and Data (DATA) ports on the device.
Details the meaning of each LED indicator on the airFiber X radio during operation.
Lists the essential requirements for installing the airFiber X radio.
Provides step-by-step instructions for connecting the device to power via PoE.
Guides on accessing and configuring the airFiber X radio's interface, including wireless mode.
Details the procedure for installing the ground wire for safety and warranty compliance.
Instructions on how to attach the airFiber X radio to its compatible antenna.
Guides on selecting a location and mounting the external GPS antenna.
Instructions for optionally mounting the airFiber PoE adapter.
Steps for aligning the radios and establishing a functional RF link.
Defines the installer's responsibility for ensuring regulatory compliance.
Details on how to connect to and log into the airFiber X configuration interface.
Describes the main tabs within the airFiber Configuration Interface.
Displays a summary of link status, configuration, and traffic statistics.
Provides detailed explanations for various status fields like Link Name, Version, and Uptime.
Describes the performance charts and log access for monitoring.
Configures fundamental wireless parameters like mode, link name, and country code.
Covers frequency selection, channel bandwidth, and modulation rate settings.
Details how to configure AES encryption and set security keys.
Configures IP address, VLAN, and other network interface settings.
Explains IP address, Netmask, Gateway, and DNS settings.
Covers advanced wireless options like GPS Clock Sync and Power Backoff.
Details settings for Data Speed, Flow Control, and Link Tracking.
Explains settings for the Management port speed and duplex.
Sets up automatic reboots based on ping monitoring.
Configures SNMP for monitoring and the device's web server.
Covers time sync, dynamic DNS, logging, and device discovery settings.
Procedures for checking and uploading new firmware to the device.
Manages administrator and read-only accounts for device security.
Covers backing up, uploading, and resetting device configurations.
Tool to visually aim and optimize the antenna for maximum link signal.
Analyzes the radio spectrum to select optimal frequencies for PtP links.
Enables and configures Waterfall, Waveform, and Real-time charts in airView.
Technical specifications for the airFiber AF-2X model.
Explains the threshold detection mechanism for occupancy on the AF-3X.
Provides critical safety guidelines related to electrical connections and usage.
Details the product warranty period, coverage, and conditions.
Information on FCC compliance for airFiber models.
Information on Industry Canada compliance for airFiber models.
Safety warnings regarding separation distance for RF exposure.
Indicates product compliance with applicable EU directives.
Lists country-specific frequency ranges and maximum output power limits.
Provides declarations of conformity in various languages.
Contact details and information for Ubiquiti Networks support engineers.
To Next Page