EasyManuals Logo

Ubiquiti EdgeRouter ER-8 User Manual

Ubiquiti EdgeRouter ER-8
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
Hardware Overview
Front Panel Ports
Console RJ45 (eth0-eth7)
USB
Interface Description
Console
RJ45 serial console port for Command
Line Interface (CLI) management. Use an
RJ45-to-DB9, serial console cable, also
known as a rollover cable, to connect the
Console port to your computer. (If your
computer does not have a DB9 port, then
you will also need a DB9 adapter.) Then
configure the following settings as needed:
Baud rate 115200
Data bits 8
Parity NONE
Stop bits 1
Flow control NONE
USB Reserved for future use.
RJ45
(eth0-eth7)
RJ45 ports support 10/100/1000 Ethernet
connections.
https://arttel.ru/
https://arttel.ru/shop/marshrutizatory/ubiquiti-edgerouter

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ubiquiti EdgeRouter ER-8 and is the answer not in the manual?

Ubiquiti EdgeRouter ER-8 Specifications

General IconGeneral
BrandUbiquiti
ModelEdgeRouter ER-8
CategoryNetwork Router
LanguageEnglish

Related product manuals