EasyManua.ls Logo

Ubiquiti EdgeRouter ER-8 - Accessing the Configuration Interface

Ubiquiti EdgeRouter ER-8
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Connect the other end of the Power Cord to a power outlet.
Accessing the Configuration Interface
1. Connect an Ethernet cable from the Ethernet port of
your computer to the port labeled eth0 on the 8-Port
EdgeRouter.
2. Configure the Ethernet adapter on your host system with a
static IP address on the 192.168.1.x subnet.
3. Launch your web browser. Type https://192.168.1.1 in the
address field. Press enter (PC) or return (Mac).
https://arttel.ru/
https://arttel.ru/shop/marshrutizatory/ubiquiti-edgerouter

Table of Contents

Related product manuals