5
Hardware Installation
3. Position the EdgeRouter Lite with the Ethernet ports facing
down. Place the Wall-Mount Slots of the EdgeRouter Lite over
the screw heads on the wall. Then slide the EdgeRouter Lite
down to lock it into place.
12V DC
GROUND
Grounding the EdgeRouter Lite (Optional)
The EdgeRouter Lite is grounded through the Power Adapter;
however, you can add optional ESD grounding for enhanced ESD
protection.
1. Loosen the Grounding Screw to secure a ground wire (not
included) to the Grounding Hole.
12V DC
GROUND
2. Secure the other end of the ground wire to a grounding block.
To Next Page
Loading...
