Ubiquiti EdgeRouter LITE User Manual

Back Panel
12V DC
Grounding Point
Ventilation Holes
Hardware Installation
Mount the EdgeRouter Lite on a wall or place it on top of a
bench.
WARNING: FAILURE TO PROVIDE PROPER VENTILATION
MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF
CLEARANCE NEXT TO THE VENTILATION HOLES FOR
ADEQUATE AIRFLOW.
Cabling Requirements
• For indoor applications, use Category 5 (or above) UTP
cabling approved for indoor use.
• For outdoor applications, shielded Category 5 (or above)
cabling should be used for all wired Ethernet connections
and should be grounded through the AC ground of the
power supply.
We recommend that you protect your networks from
harmful outdoor environments and destructive ESD events
with industrial‑grade, shielded Ethernet cable from Ubiquiti
Networks. For more details, visit www.ubnt.com/toughcable
WARNING: To reduce the risk of fire or electric shock,
donot expose the EdgeRouter Lite to rain or moisture.
Note: Although the cabling can be located outdoors,
the EdgeRouter Lite itself should be housed inside a
protective enclosure.

Ubiquiti EdgeRouter LITE Specifications

General

Processor	Dual-Core 500 MHz MIPS64
RAM	512 MB
Flash Storage	2 GB
Max Power Consumption	7 W
Operating System	EdgeOS
Operating Temperature	-10 to 45° C
Operating Humidity	10 to 90% Noncondensing
Certifications	CE, FCC, IC
Ports	3 Gigabit RJ45
Power Input	12V DC
Power Supply	External AC/DC Adapter
Routing Capacity	1 million packets per second (64-byte)
Power Method	External AC/DC Adapter