Need help?Do you have a question about the Ubiquiti EdgeSwitch ES-48-500W and is the answer not in the manual?
General| Total Ports | 48 |
|---|---|
| PoE Ports | 48 |
| PoE Budget | 500W |
| Supported Voltage Range | 100-240VAC |
| Management Interface | Web, CLI, SNMP |
| Certifications | CE, FCC, IC |
| Operating Humidity | 10 to 90% non-condensing |
| PoE | Yes |
| Jumbo Frame Support | Up to 9216 bytes |
| Weight | 5.5 kg (12.13 lb) |
| Power Supply | Internal |
| Max. Power Consumption | 500W |
| PoE Max. Wattage per Port by PSE | 15.4W / 30W |
| Networking Interfaces | 48 x 10/100/1000 Mbps RJ45 ports |
| Operating Temperature | 0 to 40 °C |
| MAC Address Table | 16K |
Instructions on establishing network connections using Ethernet cables to the switch and devices.
Provides steps to access the configuration interface using the default fallback IP address.
Details electrical safety, grounding, and servicing requirements for the equipment.
To Next Page