Need help?Do you have a question about the Ubiquiti EdgeSwitch 10 XP and is the answer not in the manual?
Details the states and corresponding statuses of the EdgeSwitch system LED.
Explains the PoE and Speed/Link/Activity status indicators for RJ45 ports.
Describes the Link/Activity status indicators for SFP ports.
Instructions to access the EdgeSwitch configuration via DHCP.
Key safety instructions and general warnings for product usage.
Information regarding electrical safety compliance and connection.
General| Number of Ports | 10 |
|---|---|
| 10/100/1000 Ethernet Ports | 8 |
| SFP Ports | 2 |
| Total Non-Blocking Throughput | 20 Gbps |
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 14.88 Mpps |
| PoE Ports | 8 |
| Max. PoE Wattage Per Port | 30W |
| Total PoE Wattage | 150W |
| Power Consumption | 150W |
| Max. Power Consumption | 150W |
| Enclosure Characteristics | Metal |
| Operating Temperature | 0 to 40 °C |
| Operating Humidity | 10 to 90% non-condensing |
| PoE | Yes |
| Jumbo Frame Support | Yes |
| PoE Standard | IEEE 802.3af/at |
| Supported Voltage Range | 100 to 240 VAC |
| Networking Interfaces | 8x 10/100/1000 Ethernet, 2x SFP |
| MAC Address Table Size | 8000 entries |
To Next Page