Need help?Do you have a question about the Ubiquiti EdgeSwitch 8 150W and is the answer not in the manual?
General| Total Number of Ports | 8 |
|---|---|
| PoE Ports | 8 |
| Total PoE Power Budget | 150W |
| Switching Capacity | 16 Gbps |
| Forwarding Rate | 11.9 Mpps |
| Operating Humidity | 10 to 90% non-condensing |
| Jumbo Frame Support | Yes |
| VLAN Support | Yes |
| Power Supply | Internal |
| Max. Power Consumption | 150W |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Layer 2 Features | Spanning Tree Protocol (STP), VLAN, Link Aggregation |
| Layer 3 Features | Static Routing |
| Management | CLI, Web UI, SNMP, Ubiquiti Network Management System |
| MAC Address Table Size | 8000 entries |
Lists all items included in the product box for setup.
Explains the status indications for LEDs on the RJ45 ports.
Details the status meanings for the System and SFP port LEDs.
Explains the function and procedure for using the reset button to restore factory defaults.
Details the Console, AC Power, DC Input, and Ground ports on the back panel.
Warns about maintaining ventilation clearance and not stacking the device to prevent hazards.
Provides step-by-step instructions and diagrams for mounting the device on a shelf.
Steps to access the configuration interface by obtaining an IP address via DHCP.
Details Federal Communications Commission (FCC) compliance rules and conditions for the device.
Provides the compliance statement for Industry Canada regulations.
Includes a warning about potential radio interference for Class A products in domestic settings.
Confirms the product meets all applicable European directives as indicated by CE marking.
To Next Page