Do you have a question about the Ubiquiti EdgeSwitch ES-24-250W and is the answer not in the manual?
Total Ports | 24 |
---|---|
PoE Ports | 24 |
SFP Ports | 2 |
Switching Capacity | 52 Gbps |
Power Consumption | 250W |
Power Supply | Internal |
PoE Voltage Range | 44 - 57V |
Operating Humidity | 10 to 90% non-condensing |
PoE | Yes |
PoE+ | Yes |
Input Voltage | 100 - 240VAC |
Certifications | CE, FCC, IC |
PoE Max. Wattage per Port by PSE | 15.4W |
Operating Temperature | -5 to 40 °C |
Data Ports | 24 x 10/100/1000 Mbps RJ45 |
MAC Address Table | 16, 000 entries |
Jumbo Frame Support | 9, 216 bytes |
Lists all items included in the EdgeSwitch box.
Lists necessary tools and environmental conditions for installation.
Explains the status indicators on the front panel of the EdgeSwitch.
Details the function and usage of the reset button.
Describes the RJ45 and SFP ports on the front of the device.
Overview of the back and side panel features, including mounting and ventilation.
Step-by-step guide for physically installing the EdgeSwitch into a rack.
Instructions for connecting network cables to the device ports.
Guide on how to connect fiber optic modules and cables.
Steps to log in via DHCP using a web browser.
Procedure to access the device using a static fallback IP address.
How to set up Power over Ethernet (PoE) modes for ports.
Technical details including dimensions, weight, power, and certifications.
Important information regarding electrical safety and proper usage.
Terms and conditions under which the product warranty is valid or void.
Information on how to return products for replacement or repair.
Legal disclaimer regarding warranties and liabilities.
Details limitations on Ubiquiti's liability for product use or misuse.
Statements regarding FCC, Industry Canada, and CE marking compliance.
Information on proper disposal of electronic equipment according to directives.
Statement that the device meets essential requirements of relevant directives.
Links to official support, community forums, and downloads.