To Next PageTo Next Page
Need help?Do you have a question about the Ubiquiti ES-24-250W and is the answer not in the manual?
General| Model | ES-24-250W |
|---|---|
| Type | Managed Switch |
| Ports | 24 |
| PoE Ports | 24 |
| Total PoE Power | 250W |
| Switching Capacity | 52 Gbps |
| Forwarding Rate | 38.69 Mpps |
| Power Supply | Internal |
| Max Power Consumption (without PoE) | 30W |
| Operating Temperature | 0 to 40 °C |
| Certifications | CE, FCC, IC |
| Enclosure Characteristics | Metal |
| Power Method | 100-240V AC, 50/60 Hz |
| Max. Power Consumption | 250W |
| Networking Interfaces | 24 x 10/100/1000 Ethernet ports, 2 x 1G SFP ports |
| Operating Humidity | 10% to 90% non-condensing |
Indicates device status like bootup, ready, UNMS connection, or firmware upgrade.
Shows PoE status for RJ45 ports: Off (No PoE), Amber (802.3af/at), Green (24V Passive).
Indicates link speed (10/100 Mbps, 1 Gbps) and activity for RJ45 ports.
Indicates link status and activity for SFP ports (1 Gbps).
Support PoE and 10/100/1000 Ethernet connections.
Hot-swappable ports supporting 1 Gbps connections.
Allows resetting the EdgeSwitch to factory defaults.
RJ45 serial port for Command Line Interface (CLI) management.
Connects the included power cord for power supply.
Obtain an IP address automatically via DHCP server.
Use the default fallback IP address 192.168.1.2 if DHCP fails.
Manage, configure, monitor, and upgrade devices via UNMS application.
Device adheres to FCC Part 15 rules for Class A digital devices.
Device complies with ISED Canada standard CAN ICES-3(A)/NMB-3(A).
Equipment complies with Class A of CISPR 32.
Indicates compliance with European Union directives.
