2. Pre-drill the holes if necessary, and secure the bracket using two
fasteners (not included).
3. Align the adapter’s slots with the tabs of the PoE Mounting Bracket, and
then slide the adapter down.
Accessing airOS via Wi-Fi
Verify connectivity in the airOS® Configuration Interface using the UNMS™
app or Web Portal. Both are available for 15 minutes immediately after you
power on the device. If necessary, you can power cycle the device to
re-enable its Wi-Fi.
UNMS App
1. Download the UNMS app.
2. Connect your device’s Wi-Fi to the SSID named: <model>:<MAC
Address>
To Next Page
Loading...
Need help?
General
