LTU-Pro Quick Start Guide
http://dl-origin.ubnt.com/qsg/LTU-Pro/LTU-Pro_EN.html[05.02.2020 14:09:00]
LTU-Pro Mount Bracket Bracket Clamp
Bracket Clamp Carriage Bolts (Qty. 2) Flange Nuts (Qty. 2)
Gigabit PoE (24V, 0.5A) with
Mounting Bracket
Power Cord
Package Contents
Installation Requirements
LTU PtMP AP, such as model LTU-Rocket
13 mm wrench
Surge protection should be used for all outdoor installations. We recommend that you use
two Ethernet Surge Protectors, model ETH-SP-G2, one near the device and the other at the
entry point to the building. The ETH-SP-G2 will absorb power surges and safely discharge
them into the ground.
Note: For guidelines about grounding and lightning protection, follow your local
LTU-Pro Quick Start Guide
×
Click for
Table of Contents
To Next Page
Need help?
General
