Need help?Do you have a question about the Ubiquiti NanoBeam 5AC Gen2 and is the answer not in the manual?
General| Memory | 128 MB DDR2 RAM |
|---|---|
| Frequency | 5 GHz |
| Antenna Gain | 19 dBi |
| Max Power Consumption | 8.5W |
| Operating Temperature | -40 to 70° C (-40 to 158° F) |
| Wireless Approvals | FCC, IC, CE |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Operating Frequency | 5150 - 5875 MHz |
| Max. VSWR | 1.5:1 |
| Polarization | Dual Linear |
| Enclosure | Outdoor UV Stabilized Plastic |
| Operating Humidity | 5 to 95% Noncondensing |
| Shock and Vibration | ETSI300-019-1.4 |
| Max. Throughput | 450+ Mbps |
| Wireless Standards | 802.11a/n/ac |
| Wind Survivability | 200 km/h (125 mph) |
| Processor | Atheros MIPS 74Kc, 720 MHz |
| Networking Interface | 10/100/1000 Ethernet |
| Power Supply | 24V, 0.5A |
| Dimensions | 189 x 189 x 125 mm (7.44 x 7.44 x 4.92 in) |
| Weight | 530 g (1.17 lb) |
| Mounting | Pole-Mounting Kit (Included) |
Emphasizes the use of shielded Ethernet cable and proper grounding for connections.
Guides through attaching the ball joint mount and lock ring for pole mounting.
Instructions on aiming the device using a bubble level and locking the aim by hand.
Guides through connecting to the NanoBeam's Wi-Fi and using the UMobile app for setup.
Details logging into the device via the UMobile app after connecting to its Wi-Fi SSID.
Explains connecting to the NanoBeam's Wi-Fi and navigating to the setup web portal.
Details entering credentials, selecting country/language, and agreeing to terms to log in.
Highlights the installer's duty to ensure operation within local country regulatory requirements.
Covers essential safety precautions and electrical safety information for proper operation.
To Next Page