Need help?Do you have a question about the Ubiquiti NanoBeam NBE2ACN and is the answer not in the manual?
General| Product Name | NanoBeam NBE2ACN |
|---|---|
| Category | Wireless Access Point |
| Frequency Band | 5 GHz |
| Antenna Gain | 16 dBi |
| Antenna Type | Integrated |
| Beamwidth | 30° |
| Max TX Power | 25 dBm |
| Range | 15+ km |
| Power Method | PoE |
| Max. Power Consumption | 8.5W |
| Memory | 64MB DDR2 |
| Wireless Approvals | FCC, IC, CE |
| Max. VSWR | 1.5:1 |
| Polarization | Dual Linear |
| Operating Humidity | 5 to 95% non-condensing |
| Shock and Vibration | ETSI300-019-1.4 |
| Operating System | AirOS |
| Wireless Standards | 802.11ac |
| Max Data Rate | 450 Mbps |
| Power Supply | 24V, 0.5A Gigabit PoE |
| Processor Specs | MIPS 74K |
| Networking Interface | 1 x 10/100/1000 Ethernet |
| Enclosure | Plastic |
| Operating Temperature | -40 to 70 °C |
| Mounting | Pole mount |
Lists all items included in the product package for setup.
Explains the reset button and Ethernet port functions and their uses.
Explains the status indicated by Power, Ethernet, and Signal LEDs for monitoring.
Details steps for mounting the device onto a pole using included hardware.
Details steps for mounting the device onto a wall, including optional hardware.
Instructions for mounting the Power over Ethernet adapter for secure placement.
Guide to using the UMobile app for initial device setup and configuration.
Guide to accessing and using the web portal for initial device setup.
Lists important safety warnings and general instructions for safe product use.
Details electrical safety requirements and precautions during installation and operation.
Outlines conditions under which the warranty is valid or void for the product.
Explains the process for returning products for warranty or repair, including RMA.
Details the disclaimers on express and implied warranties for the product and services.
Specifies limitations on liability for damages related to product use or inability to use.
Explains compliance with FCC rules and regulations for the device's operation.
Outlines compliance with Industry Canada regulations for radio equipment.
Provides warnings and guidelines regarding RF exposure and installation separation distances.
Information on compliance markings for Australia, New Zealand, and CE directives.
Provides links to Ubiquiti's website for support, community forums, and downloads.
To Next Page