Ubiquiti NanoBeamM5 User Manual

17.02.2020 NBE-M5-16 Quck Start Gude
https://dl.ubnt.com/qsg/NBE-M5-16/NBE-M5-16_EN.html 1/16
NanoBeamM5 Ball Jo  nt Mount Lock R  ng
Metal Strap PoE Adapter (24V, 0.5A) Power Cord
Package Contents
Installat  on Requ  rements
The NanoBeam can be mounted on a pole or to a wall. A Metal Strap (  ncluded)  s used
for pole-mount  ng. For wall-mount  ng, a su  table fastener such as a screw or bolt (not
 ncluded)  s requ  red.
7 mm socket wrench or screwdr  ver (for pole-mount  ng)
Wall fastener (for wall-mount  ng)
Sh  elded Category 5 (or above) cabl  ng should be used for all w  red Ethernet
connect  ons and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor env  ronments
and destruct  ve ESD events w  th  ndustr  al-grade, sh  elded Ethernet cable from
Ub  qu  t  . For more deta  ls, v  s  t u  .com/toughcable
Hardware Overv  ew
NBE-M5-16 Qu  ck Start Gu  de

Ubiquiti NanoBeamM5 Specifications

General

Max Throughput/Data Rate	150+ Mbps
Wireless Standards	802.11a/n
Power Supply	24V, 0.5A PoE
Wireless Approvals	FCC, IC, CE
RoHS Compliance	Yes
Wind Survivability	Up to 200 km/h
Output Power	25 dBm
Memory	64 MB Flash
Networking Interface	10/100 Ethernet
Power Method	Passive PoE
Operating Temperature	-40 to 70 °C
Operating Humidity	5 to 95% Noncondensing
Mounting	Pole mount (included)
Security	WPA2
Management	Web UI