Need help?Do you have a question about the Ubiquiti NBE-5AC-Gen2 and is the answer not in the manual?
General| Frequency | 5 GHz |
|---|---|
| Throughput | 450+ Mbps |
| Antenna Gain | 19 dBi |
| Power Supply | 24V, 0.5A Gigabit PoE Adapter (Included) |
| Wireless Approvals | FCC, IC, CE |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Max. Power Consumption | 8.5W |
| Operating Frequency | 5150 - 5875 MHz |
| Max. VSWR | 1.5:1 |
| Polarization | Dual Linear |
| Operating Humidity | 5 to 95% Noncondensing |
| LEDs | Power, Ethernet, (4) Signal Strength |
| Product Name | NanoBeam 5AC Gen2 |
| Model | NBE-5AC-Gen2 |
| Category | Wireless Access Point |
| Wireless Standard | 802.11ac |
| Max Data Rate | 450+ Mbps |
| Processor | MIPS 74Kc |
| Memory | 128 MB DDR2 |
| Networking Interface | 1x 10/100/1000 Ethernet port |
| Operating Temperature | -40 to 70° C |
| Dimensions | 189 x 189 x 125 mm |
| Enclosure | UV Stabilized Plastic |
| Channel Sizes | 10/20/30/40 MHz |
| Mounting | Pole Mounting Kit (Included) |
| Wind Survivability | 200 km/h |
To Next Page