Need help?Do you have a question about the Ubiquiti UAP and is the answer not in the manual?
General| Model | UAP |
|---|---|
| Ethernet Ports | 1 |
| PoE Support | Yes |
| Certifications | CE, FCC, IC |
| Networking Interface | 10/100/1000 Ethernet |
| Wi-Fi Standards | 802.11 a/b/g/n/ac |
| Frequency Band | 2.4 GHz and 5 GHz |
| Power Supply | Included PoE adapter |
| Maximum TX Power | 20 dBm |
| Wireless Security | WEP, WPA-PSK, WPA-Enterprise |
| Mounting | Wall/Ceiling |
| Operating Temperature | -10 to 70°C |
| Operating Humidity | 5 to 95% non-condensing |
Describes the meaning of different LED color and flashing patterns on the UniFi AP.
Details the Ethernet port for connectivity and the reset button functions.
Step-by-step instructions for mounting the UniFi AP on a wall.
Explains how to power the UniFi AP using TOUGHswitch or PoE adapter.
Guide to downloading, installing, and launching the UniFi Controller software.
Key safety warnings and electrical safety guidelines for product use.
To Next Page