Ublox MAX-M10M User Manual

MAX-M10M-Integration manual
Figure 34: MAX-M8 vs. MAX-M10M comparison (pin 13 - 15)
Refer to MAX-M8 and MAX-M10M data sheets for details on performance comparison [1].
A.2 Software changes
Table 33 presents a summary of the key software-related changes between u-blox M10 and u-blox
M8.
Feature Change Action needed / Remarks
Signals
Default GNSS
configuration
MAX-M10M: GPS, Galileo, QZSS and SBAS.
MAX-M8Q/C/W: GPS, GLONASS, QZSS and SBAS.
Code change (optional)
BeiDou B1C New signal. BeiDou satellite IDs up to 63 supported. Cannot
be used simultaneously with BeiDou B1I. AssistNow and power
save mode not supported.
Code change (optional)
BeiDou B1I BeiDou satellite IDs up to 63 supported. -
SBAS New SBAS PRN selection: 123, 126-129, 131, 133, 136-138. Code change (optional)
QZSS L1S SLAS corrections are now applied for navigation. Code change (optional)
UBX-22038241 - R01

Appendix Page 80 of 90
C1-Public

Ublox MAX-M10M Specifications

General

Brand	Ublox
Model	MAX-M10M
Category	Control Unit
Language	English