EasyManuals Logo

Ublox NEO-M8N User Manual

Ublox NEO-M8N
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
NEO-8Q / NEO-M8 - Hardware integration manual
UBX-15029985 - R08 Document information Page 2 of 3
C1-Public
Document information
Title NEO-8Q / NEO-M8
Subtitle
u-blox 8 / M8 GNSS modules
Document type
Hardware integration manual
Document number UBX-15029985
Revision and date
R08 5-May-2021
Document status
Production information
Disclosure restriction C1-Public
Product status
Corresponding content status
In Development /
Prototype
Objective Specification Target values. Revised and supplementary data will be published later.
Engineering Sample Advance Information Data based on early testing. Revised and supplementary data will be published later.
Initial Production Early Production Information Data from product verification. Revised and supplementary data may be published later.
Mass Production /
End of Life
Production Information Document contains the final product specification.
European Union regulatory compliance
NEO-8Q and NEO-M8J/N/M/Q/T modules comply with all relevant requirements for RED 2014/53/EU. The NEO-8Q and
NEO-M8J/N/M/Q/T Declaration of Conformity (DoC) is available at www.u-blox.com in Support > Product resources >
Conformity Declaration.
This document applies to the following products:
Product name Type number ROM/FLASH version PCN reference
NEO-M8N NEO-M8N-0-11 FLASH FW SPG 3.01 UBX-20013367
NEO-M8M NEO-M8M-0-11 ROM SPG 3.01 UBX-21015022
NEO-M8Q NEO-M8Q-0-11 ROM SPG 3.01 UBX-20013367
NEO-M8T NEO-M8T-0-11 FLASH FW3.01 TIM 1.10 UBX-20013367
NEO-8Q NEO-8Q-0-11 ROM SPG 3.01 UBX-20013367
NEO-M8J NEO-M8J-0-10 Flash FW SPG 3.05 N/A
u-blox or third parties may hold intellectual property rights in the products, names, logos and designs included in this
document. Copying, reproduction, modification or disclosure to third parties of this document or any part thereof is only
permitted with the express written permission of u
-blox.
The information contained herein is provid
ed “as is” and u-blox assumes no liability for its use. No warranty, either express or
implied, is given, including but not limited
to, with respect to the accuracy, correctness, reliability and fitness for a particular
purpose of the information. This doc
ument may be revised by u-blox at any time without notice. For the most recent
documents, visit www.u
-blox.com.
Copyright © u
-blox AG.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ublox NEO-M8N and is the answer not in the manual?

Ublox NEO-M8N Specifications

General IconGeneral
Channels72
Velocity Accuracy0.05 m/s
Time Accuracy30 ns
Max Update Rate10 Hz
Sensitivity Tracking-167 dBm
Acquisition Sensitivity-160 dBm
Cold Start26 s
Warm Start2 s
Hot Start1 s
Reacquisition1 s
Operating Temperature-40°C to +85°C
Supply Voltage2.7 V to 3.6 V
GNSSGPS, GLONASS, BeiDou, Galileo, QZSS
InterfaceUART, I2C, SPI
Dimensions12.2 mm x 16.0 mm x 2.4 mm
Position Accuracy2.5 m CEP

Related product manuals