NINA-B3 series - System integration manual
UBX-17056748 - R13 Regulatory information and requirements Page 55 of 72
C1-Public
Statement translation:
• Without permission granted by the NCC, any company, enterprise, or user is not allowed to change
frequency, enhance transmitting power or alter original characteristic as well as performance to
an approved low power radio-frequency devices.
• The low power radio-frequency devices shall not influence aircraft security and interfere legal
communications; If found, the user shall cease operating immediately until no interference is
achieved. The said legal communications means radio communications is operated in compliance
with the Telecommunications Act. The low power radio-frequency devices must be susceptible
with the interference from legal communications or ISM radio wave radiated devices.
5.4.2 End product labelling requirement
When a product integrating a NINA-B3 series module is placed on the Taiwanese market, the product
must be affixed with a label or marking containing at least the following information:
NINA-B301 Label
Figure 21: Example of an end product label that includes a NINA-B301 module
NINA-B302 Label
Figure 22: Example of an end product label that includes a NINA-B302 module
NINA-B306 Label
Figure 23: Example of an end product label that includes a NINA-B306 module
NINA-B311 Label
Figure 24: Example of an end product label that includes a NINA-B311 module
To Next Page
Loading...